Product Summary TKR-D710/D810 repeater has a DMR Tier II compatible interface, 30 channel capacity, digital display and AIS IP console interface option available with the KTI-5 Interface Box installed and the appropriate IP Network Software. Key Features - DMR Digital Air Interface
- Tier II Conventional
- Conventional IP Network - Mixed Mode Operation - Digital / Analog FM
- RF Power Output
??VHF: 50 to 5 Watts
??UHF: 40 to 5 Watts - RF Power Down Detection
- AIS IP Console Interface
- Call Interrupt
Other Features - 30 Channels
- 12.5 kHz Bandwidth
- Two-Slot TDMA Operation
- Two-Digit Numeric Display
- LED Status Indicators
- 6-Programmable Function Keys
- Programmable AUX I/O's
- DTMF Remote Control
| Product Summary The NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports
three digital CAIs - NXDN, DMR and P25 (Phase 1 & 2) - plus FM analog in a single radio.
Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own
pace - whether you are intent on going fully digital, undecided about which digital system to
pick, or just wanting to maintain both digital and analog for a while. A NX-5000 radio can
simultaneously support two digital protocols plus analog, offering the following combinations:
FM/DMR/NXDN, FM/NXDN/P25, and FM/DMR/P25.
Features:
- Multi-Digital operation in NXDN, DMR, and P25 (Phase 1 & 2)
- Any combination of two digital protocols may be selected from NXDN, DMR, and P25
- Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
- Large, Color 1.74" (240 x 180 pixels) Transflective TFT Display for better interface even in direct sunlight and with use of polarized sunglasses
- Easy to follow GUI for at-a-glance operational status and Multi-line Text to convey information
- 4-way Directional-pad (D-pad) and 2-Position Lever Switch for intuitive control
- Built-In GPS Receiver/Antenna for effective fleet management
- Bluetooth® Module Built-in for hands-free operation
- Renowned KENWOOD Audio Quality achieved with Active Noise Reduction (ANR) that utilizes built-in DSP with two microphones for suppression of ambient noise
- Built-in 56-bit DES Encryption
- Optional 256-bit AES Encryption
- Built-in Motion Sensor for man down detection
- microSD/microSDHC Up to 2GB/32GB Memory Card Slot for increased memory capacity for "Voice & Data""
- IP67/68 and MIL-STD-810 C/D/E/F/G
- 6 W (136-174 MHz ) Models
- 5 W (380-470, 450-520 MHz) Models
- 3 W (700/800 MHz) Models
- Full Key Models (w/numeric keypad) and Standard Key Models (w/o numeric keypad)
- Maximum of 1024 CH, 128 Zones (4000 Ch. Opt)
- 1 W Speaker Audio
| Product Summary NX-1202AV/NX-1302AU is efficient and functional 2W portable radios operate in analog FM. It is packed with features for intuitive operation and excellent performance. The features include a 7-color LED indicator, KENWOOD 2-pin audio accessory connector, renowned KENWOOD audio quality, multiple scan, lone worker and emergency function. If you wish to transition to Digital capability, by purchasing a software option, DMR and Analog or NXDN and Analog mixed operation is available which gives you the freedom and flexibility to migrate at your own pace. All this comes in a tough, compact radio with great value and all weather reliability!
Features:
- RF output power 2W both on VHF/UHF
- Large 7-Color LED indicator on the top panel
- Selective Power-on LED
- Selective Call Alert LED
- Battery Level Indication
- Multi-status function indication
- Renowned KENWOOD Audio Quality: TX/RX audio profile with optimizable digital processor
- Audio Equalizer: Flat, High, Low
- Auto Gain Control: On, High, Low, Off
- Noise Suppressor
- Microphone type settings
- Multiple Scan Functions; Dual Priority, Single Priority, Single Zone, Multi, Normal Scan
- VOX & PTT -triggered Semi- VOX, Voice-operated TX
- Emergency Function: Customizable Emergency Profile
- Lone Worker
- Max / Min Volume setting & Volume control
- Voice Announcement
- Remote Stun / Kill / Check
- Electronic Serial Number (ESN)
- MIL-STD-810 C/D/E/F/G
- IP54 and IP55
- Multi-protocol digital radio: Designed to operate under NXDN or DMR digital and FM analog protocols (Optional License required)
| Product Summary The KCH-21R ia a speaker microphone with a full-featured control head, which enables one-hand operation of PTT, volume and channel selection. Designed to be used with the KENWOOD NEXEDGE® NX-5000 Series mobiles, the control head's large, bright 1.74" LCD display makes it easy to do at-a-glance status checks. The 14-character full-color display has 5 lines for customizable menus and icons and the 7-color LED display at the top of the unit can be used for quick visual alerts, even in low light and high noise environments. The KCH-21R has built-in Bluetooth® with HSP (headset) and SPP (serial port) profiles and a powerful built-in speaker with 1W output, supported by active noise reduction.
The KCH-21R was designed in collaboration with our fire service and police customers who asked us for easy, intuitive one-hand operation. Our public safety customers also wanted to be able to remotely control multiple NX-5000 Series RF decks, which many of our customers use in their vehicles to enable full tri-band receive and transmit.
FEATURE HIGHLIGHTS
- Speaker microphone with full-featured control head
- Handheld design offers one-handed operation of PTT, volume and channel selection
- Designed to work with the NX-5000 Series mobile radios using Control Head Remote Kit
- Intuitive operation similar to that of the KCH-19 and KCH-20R control heads
AUDIO FEATURES
- Built-in speaker with 1 W output
- Active noise reduction for a single microphone enabled by DSP on the radio
- 3.5mm-diameter earphone jack on the bottom
DISPLAY FEATURES
- Large 1.74-inch TFT/transflective LCD for at-a-glance operational status checking
- Intuitive GUI - 14-character full-color display with 5 lines for menus and icons
- 7-color programmable LED located at the top for easy recognition
OTHER FEATURES
- Multi-head/Multi-deck Configuration
- Built-in Bluetooth® with HSP (headset) and SPP (serial port) profiles
- Data interface for radio programming, keyloading and data I/O
- Optional adapter for the RF Deck (KRK-15BM Control Head Remote Kit) is required
- for connection to the mobile radio
MULTIPLE REMOTE CONTROL HEAD CONFIGURATION
- Intuitive graphical UI is used even for the selection of multiple RF decks.
- Dual Remote Control Heads x Multi RF Decks
- Dual Remote Control Heads x Single RF Deck
|
828-733-1822
828-733-1822
